Weather-guard 1450 Bedienungsanleitung PDF herunterladen

(9) 5/16 - 18 Blind

Fastener

(1) 5/16 - 18 x 2-1/4"

Bolt, Black Oxide

(9) 5/16 - 18 x 1-1/4"

Hex Bolt

(9) 5/16" Lock Washer

(3) 3/8 – 16 x 3/4" Thread Cut

Bolt

(1) Blind Fastener

Installation Tool

(4) #10 – 24 x 2-3/4"

Machine Screw

(1) Ladder Stop

(2) Ladder Strap

(1) Tube of Silicone

Sealant

(1) 3/8 - 16 x 3-1/4" Carriage

Bolt

(1) 3/8 - 16 Nylon

Lock Nut

(1) 3/8" Flat Washer

(15) 5/16” Flat Washer

(1) Front Leg Socket

(1) Rear Leg Socket

(1) Front Mounting

Bracket

(1) Rear Mounting

Bracket

(2) Upright

(2) Extension

(1) F-150 Adapter

(4) #10 – 24 Nylon

Lock Nut

(4) #10 Flat Washer

(2) Plastic Rope Cleat

(2) 3/8 – 16 x 1" Thread Cut

Bolt

(1) Floor Mounting

Spacer

(2) 3/8 - 16 Nylon

Lock Nut

(2) 5/16 - 18 x 1"

Hex Bolt

• Electric Drill with 1/2” Chuck

• 1/2” and 7/32” Drill Bits

• 1/2” Open or Box End Wrench

• 9/16” Open or Box End Wrench

• 3/8” Open or Box End Wrench

• Screwdriver - Flat Head

• Framing Square

• Level

• Center Punch

• Hack Saw

• Tape Measure

OPERATORS MANUAL

WEEKENDER

STEEL LADDER RACK

MODELS 1450 & 1475

Approximate installation time: 60 minutes (depending on truck equipment installation experience and/or DIY level)

INSTALLATION TIME

TOOLS REQUIRED

PARTS LIST

WWW.WEATHERGUARD.COM

Frt LegSocket.eps

Rear LegSocket.eps

Frt MountingBrkt.eps

Rear&AngleMounting Brkt.eps

Reduced 80% (not lines)

Upr

igh

t.eps

Uprights.eps

1450 1475

Extension.eps

Ford F-150Adaptor.eps

3/8-16 x 3-3/4" Carriage Bolt

3/8" Flat Washer

#10 Flat Washer

5/16" Flat Washer

3/8" Flat Washer

#10 Flat Washer

5/16" Flat Washer

5/16” x 2 1⁄4” Bolt.eps

5/16” x 1 1/4” Bolt.eps



#10-24 x 2 3/4" Machine Screw

3/8" Flat Washer

#10 Flat Washer

5/16" Flat Washer

5/16” x 1 1/4” Bolt.eps



ThreadCutBolt,3/4".eps

1” Bolt.eps

1475 Shown

Part No. 24-0192 REV. C ECN 5315 05/13

1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - STEEL LADDER RACK

(9) 5/16 - 18 Blind Fastener(1) 5/16 - 18 x 2-1/4" Bolt, Black Oxide(9) 5/16 - 18 x 1-1/4" Hex Bolt(9) 5/16" Lock Washer(3) 3/8 – 1

Seite 2

Read and understand all WARNINGS, DANGERS, NOTICES and INSTRUCTIONS before assembly and installation.Ladders must be secured per ANSI standard A14.2-1

Seite 3 - 1450,#1b.eps

GETTING TO KNOW YOUR NEW TRUCK RACK1450,#1b.epsAll Enlarged 135%, 110% (not lines)Extension 1450(1-1/2" square tube)Ladder Strap, 1450/1475Extens

Seite 4 - FRONT OF BED

1450,#2a&2b.epsFRONT OF BED5/16-18 x 1-1/4”Hex Head Bolt(4 places)5/16” Lock Washer(4 places)5/16”Flat Washer(4 places)Mark the Front Leg Socketho

Seite 5 - 1450,#3a.eps

51450,#3a.epsLong End of AngleRear Leg SocketPlate 2Plate 1NOTE: If the best mounting hole location is between floorribs, a floor spacer and/or two ex

Seite 6 - not used)

6 Start here for 45º degree tailgate stop.2h. Insert the rear leg socket into the rear mounting bracket plate 1 as seen in 2b. (Plate 2 will not be

Seite 7 - Figure 3

Rope CleatTwo Rope Cleats to be mounted where desired.#10-24 x 2-3/4”Machine Screw(2 places)#10-24 Flat Washer(2 places)7/32” Hole(2 places#10-24 Nylo

Seite 8 - BlindFastInstall(Fig.7).eps

LIMITED WARRANTYThis LIMITED WARRANTY is made by Knaack LLC, 420 E. Terra Cotta Ave., Crystal Lake, Illinois to the original retail purchaser of KNAAC

Kommentare zu diesen Handbüchern

Keine Kommentare

Weather-guard 1450 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Weather-guard 1450 herunter. WEATHER GUARD 1450 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Weather-guard 1450